FIRE RESISTANT COVER SYSTEM FOR AIR CONDITIONING DUCTS, STEEL AND COPPER PIPES, CABLES RACEWAYS AND FIRE STOP AIR LOCKS
KM-FC 120 COVER
KM-FC 180 COVER
The system is made up of a band of cladding suitable for the fire protection of air conditioning ducts, steel and copper pipes, cables raceways and fire stop air locks.
Made up of two sheets, both of a 400 g/m2 high temperature fibers fabric, one of them is covered with aluminum foil. Inside there is a 1 mm alkaline earthy silicate paper sheet, which is between two layers of ecological bio-soluble felt (128 kg/cm) for high temperature and edged with spun teflon glass.
KM-FC120COVER. Fire protection band for air conditioning ducts.
KM-FC180COVER. Fire protection band for steel and copper pipes, cables raceways and fire stop air locks.
For the fire protection of the air conditioning ducts in fire risk areas. KM-FC120COVER protective band is 1200 mm wide and 30 mm thick, supplied in rolls of 5 meters (6 m²). The protection is made up of a layer of Cover wrapped around the ducts.
The longitudinal joints overlap by 200 mm, the perimeter joint overlap by 600 mm for 1000x500 mm duct; the joints are covered with adhesive aluminum tape KM-ALU.
All overlaps are fixed by a fibers fabric belt KM-CGH
For the fire protection of the air locks, copper and steel pipes, cables raceways in fire risk areas and crossings. KM-FC180COVER protective band is 1200 mm wide and 30 mm thick, supplied in rolls of 5 meters (6 m²). The protection is made up of a layer of Cover wrapped around the system and fixed with iron wire.
The joints overlap by about 50 mm, and covered with adhesive aluminum tape KM-ALU.
All overlaps are fixed by a fibers fabric belt KM-CGH.
• KM-FC120COVER. According to the European Standard UNI-EN 1366-1 EI120
• KM-FC180COVER. According to the European Standard UNI-EN 1366-3 EI180 and UNI EN 1366-5 EI180
Outside covering: white high temperature fibers fabric/aluminized high temperature
fibers fabric of 400 g/m², operating temperature up to 550°/600°C
Inside material: ecological bio-soluble fiber felt 128 kg/m³; 1 mm alkaline earthy
silicate paper sheet, with classification temperature of 1100°C
Density: 25 kg/m2
Thickness: 30 mm ± 5%
Supplied in: in 5 m rolls (6 m²)
Storage: limitless, at room temperature and not weathered
Transport: no restrictions on land
no restrictions ICAO/IATA-DGR
(not in direct contact with edible products)
It does not require any precautionary measures for its use and handling.
Classification and labelling: the material does not require any special labelling
Danger symbols and indications: none.
Safety advice: none.