COMPARTMENTING AND FIRE PROOFING SEALINGS
FIRE RESISTANT GASKET FOR
[removed]ELECTRICAL SOCKETS AND SWITCH BOX
The system consists of a preformed fire-resistant graphitic intumescent fibre sheet KM-FF107. In case of fire, the material expands and protects the boxes for electrical installations.
Preformed fire-resistant graphitic intumescent fibre sheet
KM-CGS 145x145 mm, 2 mm thick.
KM-CGS 210x145 mm, 2 mm thick.
KM-CGSQ BOX 400x300 mm, 2 mm thick.
The adhesive preformed sheet is applied to protect the sides and the back of the box or junction box.
The seal protects against fire and replaces the plasterboard removed to make the hole of boxes or junction boxes.
CERTIFICATIONS · According to European Standard UNI-EN 1366-3 EI 120-EI 60/E 90
on plasterboard walls.
KM-CGS/CGSQ Box is a graphitic intumescent preformed sheet for the fire protection of boxes or junction boxes for electrical installations.
Supplied in sheets of fixed size for the fire protection of electrical appliances. The preformed sheets have a 45° cut on the four corners. Remove the protective film from the adhesive side and apply the gasket on the rear side of the box. Fold the edges of the gasket so that it sticks on the sides of the box. Make the holes for corrugated electrical pipes with a cutter. Introduce the protected box in the hole on the plasterboard wall.
Colour: dark grey
Density: 225 kg/m3
Sizes: 400x300/210x145/145x145 mm
Thickness: 1.8 mm
Free expansion: 5 times at 450ºC in 15 min
Pressure: 5 bar at 400ºC
Reaction temperature: 250°C
Compressibility: up to 50%
Dangerous reactions: none observed
Storage inside room, not exposed to water and moisture
Transport: no restrictions on land
no restrictions ICAO/IATA-DGR
(not in direct contact with edible products)
It does not require any precautionary measures, for its use and handling
Acute effects to exposure: none
Classification and labeling: the material does not require any special labeling
Safety advice: none